CN | EN
Large-Aperture Beam Spot Quality Analyzer

Large-Aperture Beam Spot Quality Analyzer

 

 

Product Introduction

The Large-Aperture Beam Spot Quality Analyzer is equipped with a short-wave infrared global shutter sensor, with a spectral response of 400-1700nm, and can detect beam spots up to Φ45mm. It features 5μm pixels, a dynamic range of 58.7dB, a signal-to-noise ratio of 52.6dB, and an exposure range of 15μs~60s. With high-speed USB3 transmission, it collects high-frame-rate beam spot profiles. The analyzer comes with an adjustable optical mount, allows real-time beam spot image acquisition, and can analyze beam parameters such as spot size, energy distribution, ellipticity, and centroid offset, completing quantitative beam quality testing from the visible to the short-wave infrared spectrum.

 

Applications

Laser development and factory quality inspection; beam mode and energy uniformity testing;

Fiber coupling, collimators, optical lenses, and infrared optical device testing;

Lidar, infrared light sources, and short-wave infrared optical system calibration;

Scientific optical experiments, beam shaping, optical path alignment and debugging;

Machine vision and infrared imaging light source beam evaluation

 

Product Advantages

Wideband coverage: 400nm visible light to 1700nm short-wave infrared, capable of detecting both visible light and SWIR with a single unit

 

Large beam spot detection: supports beam spots up to 45mm, suitable for large-aperture beam measurements without additional beam-reducing optics

 

High-performance sensor: global shutter sensor with 5μm pixels and high dynamic range, accurately capturing both weak and strong light spots

High frame rate: 640×512 resolution up to 428.1fps, 320×256 up to 807fps, suitable for dynamic beam monitoring

Flexible adjustable mount: precision displacement adjustment mount for quick optical path alignment, easy installation and calibration

Long exposure compatibility: 15μs~60s wide exposure range, suitable for pulsed and continuous light sources

High-speed USB3 interface: high-speed data transmission with compatible analysis software, one-click beam spot report generation

 

Product Specifications

Wavelength Range

400-1700nm

Spot Size

Up to 45mm

Chip Size

1/4“

Pixel Size (μm)

5x5μm

Dynamic Range

58.7dB

52.6dB

Signal-to-Noise Ratio

15μs-60s

Exposure Time

428.1@640x512

807@320x256

FPS/Resolution

33mm

Dimensions

USB3

*The final right of interpretation of this technical specification belongs to the manufacturer.

 

 

Consult customer service to obtain detailed materials and exclusive solutions.

Tel: 400-1800-685

Email:info@gzjygd.com